Explore What's Possible
Put PICA
Technology in
Your Hands.
This sample kit showcases just a few of the many ways flex circuits can be manufactured. Since every flex circuit is completely custom, the possible variations are nearly unlimited. Key factors that influence design include substrate material, copper foil thickness, trace layout, bending requirements, component placement, controlled impedance, layer quantity, and overall flexibility—considering potential stress points during bending.
Each sample in the PICAKit collection measures 1 inch x 5 inches, providing a tangible and standardized format for engineers to assess and evaluate our technology.
The Six Constructions in Your PICAKit
Six Constructions. One Practical Kit.
Each construction highlights a different combination of materials and capabilities so you can compare, evaluate, and find the right solution for your application.
Flex-to-Install
- Standard two-layer flex with 35 µm RA Cu on both sides
- Designed for limited flexing, mainly during installation
- Thicker construction for robust design
Dynamic Flex
- Built for repeated flexing
- 18 µm RA Cu per layer
- Adhesiveless polyimide for thinner, more flexible 3D packaging
Highly Dynamic Flex
- For continuous bending
-
2 µm High-Ductility Electrodeposited
(HDED) Cu - Ultra-thin construction for extreme flexibility
- Exceptional endurance from hundreds of thousands to millions of cycles
High Current Flex
- For high current with minimal bending
- 2 oz copper (Cu)
- Thicker adhesive and base film for better performance
Impedance Control
- Three layers of ½ oz Cu
- Polyimide layers act as shield
- Polyimide thickness varies with impedance
EMI Shield
- One layer of ½ oz Cu
- Two outer layers of 8 µm EMI film
- Maintains flexibility with EMI protection
See the PICAKit in Action
Inside the PICAKit
Watch how the PICAKit brings six flexible circuit constructions together in one practical engineering resource for comparing materials, capabilities, and design possibilities.
Request Your PICAKit
Fill out the form below to receive a PICAKit. Include any questions or details about your application so our team can better understand your design needs.
